The Wing Boost 3 ARGB combines many advantages of its famous predecessors with circular, addressable RGB-LED lighting in the outer frame. The eponymous "Wing Boosts", small elevations on the impeller intake side, reduce air turbulence. The fan therefore works quieter, especially at higher speeds, than conventional fan designs would allow. The triple set offered here consists of three fans including an RF receiver, splitter cables and remote control for controlling and synchronizing the three fans included in the set.

The features of the Alpenföhn Wing Boost 3 ARGB fan at a glance:
- Three 140 millimeter fans with digitally addressable RGB lighting
- Hydrodynamic bearing for high performance, quiet operation and a long service life
- Optimized rotor blades provide the perfect balance between contact pressure and airflow
- Speed range from 400 to 1,500 rpm
- 4-pin PWM and 3-pin RGB connector
- Including RGB and PWM splitter, RF remote control and receiver as well as screws
- ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome
Wing Boost 3 ARGB: Powerful 140mm fan
The Wing Boost 3 ARGB is a PWM -controlled, 140 millimeter fan that is equally suitable for mounting on housings, processor coolers and radiators. The fan works in a speed range between 400 and 1,500 revolutions per minute , achieving a delivery volume of 134 m³ / h (78.86 cfm) and a static pressure of 2.07 mm H2O .

The hydraulic bearing, which reduces friction noise to a minimum, and the rubber decouplers in the fan frame guarantee whisper-quiet operation, even in the low speed range. The Wing Boost 3 generates ARGB under full loada noise level of 25.6 decibels or less .

Addressable RGB-LED lighting in the frame
The Alpenföhn Wing Boost 3 ARGB is equipped with digitally addressable RGB-LED lighting. The manufacturer has integrated two rings that shine in 16.8 million colors in the fan frame, which casts a light glow on the impeller and can be connected to the mainboard or corresponding controllers via a 3-pin RGB connector. The Wing Boost 3 RGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light .

Included with this set is next to the three fans of type 3 ARGB Alpenföhn Wing Boost alsoComplete accessories to synchronize the PWM signal and RGB-LED lighting of the three fans . The lighting can be controlled using the included remote control.

Technical details:
- Dimensions: 140 x 140 x 25 mm (W x H x D)
- Material: plastic, rubber
- Color: White (fan, frame), gray (decoupler)
- Volume: max. 19 dB (A)
- Speed: 400 - 1,500 rpm
- Funding volume: max. 134 m³ / h (78.86 cfm)
- Static pressure: 2.07 mm H2O
- Voltage: 12V
- Voltage range: 7-13.2V
- Nominal power: 2.76 W.
- Input current: 0.23 A
- Connection: 4-pin PWM, 3-pin RGB (5VDG)
- Lighting: RGB (16.8 million colors)

Contents:
- 3x Alpenföhn Wing Boost 3 RGB
- 12x screws for housing
- 12x screws for radiator
- 1x RF remote control
- 1x RF receiver
- 1x RGB splitter
- 1x PWM splitter